BS EN 4674-003:2015 pdf download – Aerospace series — Electrical cables, installation — Self- wrapping shielding (EMI) protective sleeve Part 003: Open sleeve — Inside pressurized area — EMI protection 5 kA — Temperature range — 65 °C to 200 °C — Product standard
1 scope
This European Standard specifies the characteristics of flexible 5 kA self-wrapping shielding (EMl) protectionsleeves, to be installed inside pressurized areas on electrical cables or cable bundles,made from nickelplated copper strands and PPs (polyphenylene sulfide) monofilament.
Temperature range: – 65 °C to 200 °c.
2Normative references
The following documents,in whole or in part,are normatively referenced in this document and areindispensable for its application. For dated references, only the edition cited applies. For undated references,the latest edition of the referenced document (including any amendments) applies.
EN 2591-214,Aerospace series —Elements of electrical and optical connection —Test methods— Part 214:Lightning strike, current and voltage pulse
EN 2591-307,Aerospace series — Elements of electrical and optical connection —Test methods — Part 307:Salt mist
EN 2825,Aerospace series — Burning behaviour of non metallic materials under the influence of radiatingheat and flames-Determination of smoke density
EN 2826, Aerospace series — Burning behaviour of non metallic materials under the influence of radiatingheat and flames -Determination of gas components in the smoke
EN 3475,Aerospace series – Cables, electrical, aircraft use — Test methods 1)
EN 3844-1,Aerospace series — Flammability of non metallic materials — Part 1:Small burner test, vertical —Determination of the vertical flame propagation
EN 4674-001, Aerospace series — Electrical cables, installation — Self-wrapping shielding (EMI) protectivesleeve-Part 001: Technical specification
EN 4674-002, Aerospace series — Electrical cables,installation —Self-wrapping shielding (EMI) protectvesleeve-Part 0o2: General and list of product standard
EN 6059,Aerospace series —Electrical cables, installation — Protection sleeves —Test methods 1)ISO 4892-3, Plastics —Methods of exposure to laboratory light sources — Part 3:Fluorescent UV lamps
IEC 62153-4-3,Metallic communication cable test methods — Part 4-3: Electromagnetic compatibility (EMC)一Surface transfer impedance – Triaxial method 2)
ASTM D4894,Standard Specification for Polytetrafluoroethylene (PTFE)Granular Molding 3)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 4674-001 apply.
4 Required characteristics
4.1 Composition
This product is manufactured from PPS (polyphenylene sulfide) monofilaments and nickel-plated copper wire,
with or without an internal protective tape.
4.2 Dimensions and mass of the sleeve
See Figures 1 and 2, Tables 1 and 2.
The minimum sleeve lengths shall be in accordance with EN 4674-001.BS EN 4674-003 pdf download.