BS ISO 3466:2016 pdf download – Machine taper pin reamers with parallel shanks
This International Standard lays down the dimensions of machine taper pin reamers with parallel shanks.
It covers only metric dimensions, which are the only recommended dimensions in the future for these types of reamers.
The reamers have been designed to produce holes for taper pins manufactured to ISO 2339, in the range of 2 mm to 12 mm nominal diameter.
Unless otherwise stated, these reamers will be right-hand cutting.
The flutes may be straight or left-hand spiral at the option of the manufacturer.
Hand taper pin reamers are dealt with in ISO 3465, and machine taper pin reamers with Morse taper shanks in ISO 3467.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 4203, Parallel shank tools — Driving tenons and sockets — Dimensions
3 Driving tenons
The dimensions of the driving tenons for machine taper pin reamers with parallel shanks, when required, shall be in accordance with ISO 4203.BS ISO 3466 pdf download.