BS ISO 20957-6:2021 pdf download – Stationary training equipment Part 6: Treadmills, additional specific safety requirements and test methods 1 scope This document specifies safety requirements and test methods for treadmills in addition to the generalsafety requirements and test methods of ISO 20957-1. It is intended that this document is appliedtogether with ISo 20957-1. This document deals with significant hazards, hazardous situations and events relevant to stationarytraining equipment used as intended and under the conditions of misuse foreseeable by themanufacturer (see Clause 4). This document is applicable to power-driven as well as to non-power/manually driven trainingequipment type treadmills (hereafter referred to as treadmills) with the classes S,H and l and classes A,B and C regarding accuracy. This document is not applicable to treadmills which are manufactured before it publication. 2Normative references The following documents are referred to in the text in such a way that some or all of their contentconstitutes requirements of this document. For dated references, only the edition cited applies.Forundated references, the latest edition of the referenced document (including any amendments) applies.EN 60335-1，Household and similar electrical appliances — Safety — Part 1: General requirements(IEC 60335-1:2010, modified) EN 60601-1, Medical electrical equipment — Part 1: General requirements for basic safety and essentialperformance (IEC 60601-1:2005) ISO 11201,Acoustics —Noise emitted by machinery and equipment —Determination of emission soundpressure levels at a work station and at other specified positions in an essentially free field over a reflectingplane with negligible environmental corrections ISO 11202，Acoustics — Noise emitted by machinery and equipment – Determination of emissionsound pressure levels at a work station and at other specified positions applying approximateenvironmental corrections ISO 12100, Safety of machinery —General principles for design —Risk assessment and risk reductionISO 12947-1:1998,Textiles —Determination of the abrasion resistance of fabrics by the Martindale method- Part 1: Martindale abrasion testing apparatus ISO 20957-1:2013,Stationary training equipment —Part 1: General safety requirements and test methods 3Terms and definitions Forthe purposes of this document, the terms and definitionsgiven in ISO 20957-1and the following apply. 3.11 folding treadmill treadmill designed with some components that can be moved to allow a more compact non-useablestorage position 4 List of significant hazards Table 1 shows the significant hazards, hazardous situations and events, as far as they are dealt with inthis document, identified by risk assessment as significant for this type of equipment and which requireaction to eliminate or reduce the risk. For a particular treadmill, a risk assessment should...
Download Address
Download