BS ISO 22915-8:2018 pdf download – Industrial trucks — Verification of stability Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated The ISO 22915 series deals with the safety of industrial trucks, as defined in ISO 5053‑1, relative to their stability and the verification of that stability. For the purposes of the ISO 22915 series, industrial trucks are wheeled, self‑propelled or pedestrian‑propelled vehicles, excepting those running on rails. They are either operator‑controlled or driverless and designed to carry, tow, push, lift, stack or tier in racks. This document specifies an additional test for verifying the stability of a truck stacking with mast tilted forward and load in the elevated position. It is applicable to the following types of truck: a) counterbalanced trucks with tiltable masts, as specified in ISO 22915‑2; b) reach (retractable mast or forks) and straddle trucks with tiltable masts, as specified in ISO 22915‑3; c) pallet stackers with tiltable masts, as specified in ISO 22915‑4; d) bidirectional and multidirectional (retractable mast or forks) trucks with tiltable masts, as specified in ISO 22915‑7; e) rough-terrain trucks with tiltable masts, as specified in ISO 22915‑13; f) counterbalanced trucks fitted with articulated steering with tiltable masts, as specified in ISO 22915‑15. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3691‑1, Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks ISO 5053‑1, Industrial trucks — Terminology and classification — Part 1: Types of industrial trucks ISO 22915‑1, Industrial trucks — Verification of stability — Part 1: General ISO 22915‑2, Industrial trucks — Verification of stability — Part 2: Counterbalanced trucks with mast ISO 22915‑3, Industrial trucks — Verification of stability — Part 3: Reach and straddle trucks ISO 22915‑4, Industrial trucks — Verification of stability — Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height ISO 22915‑7, Industrial trucks — Verification of stability — Part 7: Bidirectional and multidirectional trucks 4.2.3 Bidirectional and multidirectional trucks The position of the truck...
Download Address
Download