BSI BS EN 13445-1:2002 pdf download – Unfired pressure vessels — Part 1: General 2Normative references This European Standard incorporates, by dated or undated reference, provisions from other publications.Thesenormative references are cited at the appropriate places in the text and the publications are listed hereafter.Fordated references,subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision.For undated references the latest edition of thepublication referred to applies (including amendments) EN764-1:2004, Pressure Equipment —Terminology —Part 1:Pressure, temperature, volume, nominal size.EN 764-2:2002,Pressure Equipment — Part 2: Quantities, symbols and units. EN 764-3:2002,Pressure Equipment — Part 3: Definition of parties involved. EN 13445-2:2002,Unfired pressure vessels – Part 2: Materials EN 13445-3:2002,Unfired pressure vessels – Part 3: Design EN 13445-4:2002,Unfired pressure vessels – Part 4: Fabrication EN 13445-5:2002,Unfired pressure vessels – Part 5: lnspection and testing EN 13445-6:2002,Unfired pressure vessels – Part 6:Requirements for the design and fabrication of pressurevessels and pressure parts constructed from spheroidal graphite cast iron EN 13445-8:2006,Unfired pressure vessels – Part 8: Additional requirements for pressure vessels of aluminiumand aluminium alloys 3Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 764-1:2004,EN764-2:2002 andEN 764-3:2002 and the following apply. 3.1 main pressure bearing parts parts which constitute the envelope under pressure, essential for the integrity of the equipment 3.2 pressure vessel housing and its direct attachments up to the coupling point connecting it to other equipment, designed and built tocontain fluids under pressure NOTE A vessel may be composed of more than one chamber. 3.3 fluid gas, liquid and vapour in their pure phase as well as mixtures thereofNOTE A fluid may contain a suspension of solids. 3.4 piping pipe or system of pipes,tubing, fittings, expansion joints, hoses or other pressure-bearing components, intendedfor the transport of fluid, connected together and integrated into a pressure system 3.5 assembly several pieces of pressure equipment assembled by a manufacturer to constitute an integrated and functionalwhole 3.6 pipelines piping or system of piping designed for the conveyance of any fluid or substance to or from an installation (onshoreor offshore) starting from and including the first isolation device located within the installation and including all theannexed equipment designed specifically for pipelines 3.7 maximum allowable pressure (PS) maximum pressure for which the pressure vessel is designed as specified by the manufacturer 3.8 maximum/minimum allowable temperature (TS) maximum/minimum temperature for...

Download Address

  • Download