BS 12899-1:2001 pdf download – Fixed, vertical road traffic signs — Part 1: Fixed signs ENV 1995-1-1, Eurocode 5 – Design of timber structures – Part 1-1 : General rules and rules for buildings. ENV 1999-1-1, Eurocode 9 : Design of aluminium structures – Part 1-1 : General rules and rules for buildings. ENV 1991-2-4:1995, Eurocode 1 : Basis of design and actions on structures – Part 2-4 : Actions on structures – Wind actions. ENV 1993-1-1:1992, Eurocode 3 : Design of steel structures – Part 1-1 : General rules and rules for buildings. ISO 4, Information and documentation – Rules for the abbreviation of title words and titles of publications. ISO 139, Textiles – Standard atmospheres for conditioning and testing. ISO 877, Plastics – Methods of exposure to direct weathering, to weathering using glass – Filtered daylight, and to intensified weathering by daylight using Fresnel mirrors. ISO 1459, Metallic coatings – Protection against corrosion by hot dip galvanised – Guiding principles. ISO 1461, Hot dip galvanised coatings on fabricated iron and steel articles – Specifications and test methods. ISO 6272, Paints and varnishes – Falling-weight test. ISO 9227, Corrosion tests in artificial atmospheres – Salt spray tests. CIE 15.2, Colorimetry. CIE 17.4, International lighting vocabulary. CIE 39.2, Recommendations for surface colours for visual signalling. CIE 54, Retroreflection definition and measurement. CIE 74, Roadsigns. 3 Terms and definitions, symbols and abbreviations For the purposes of this European Standard, the symbols and abbreviations given in ISO 4 apply. The photometric terms and definitions given in CIE 17.4 and the sign descriptions given in CIE 74 also apply, together with the following : 3.1 fixed sign sign which is intended to remain fixed in position and whose supports are usually set into the ground 3.2 protective edge fabrication intended to reinforce the edge of the sign and to reduce the severity of personal injury in the event of bodily impact with the sign edge 3.3 substrate material used to support the non-retroreflective and retroreflective sign face materials 3.4 standard shape sign faces circles, triangles, squares, diamonds and octagons containing legends in accordance with the provisions of the Vienna Convention 4 Dimensions and tolerances 4.1 Dimensions and tolerances of standard shape sign faces The dimensions and tolerances of standard shape sign faces shall conform to the customer’s requirements. 4.2 Corner radii Unless otherwise specified in the customer’s requirements the corner radii shall be...
Download Address
Download