BS EN 1559-3:2011 pdf download – Founding — Technical conditions of delivery Part 3: Additional requirements for iron castings 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 287-6, Qualification test of welders — Fusion Welding — Part 6: Cast iron EN 444, Non-destructive testing — General principles for radiographic examination of metallic materials by X-and gamma-rays EN 571-1, Non destructive testing — Penetrant testing — Part 1: General principles EN 583-1, Non-destructive testing — Ultrasonic examination — Part 1: General principles EN 1011-8, Welding — Recommendations for welding of metallic materials — Part 8: Welding of cast irons prEN 1369, Founding — Magnetic particle testing EN 1370, Founding — Examination of surface condition EN 1371-1, Founding — Liquid penetrant testing — Part 1: Sand, gravity die and low pressure die castings EN 1559-1, Founding — Technical conditions of delivery — Part 1: General EN 1560, Founding — Designation system for cast iron — Material symbols and material numbers EN 12680-3, Founding — Ultrasonic testing — Part 3: Spheroidal graphite cast iron castings EN 12681, Founding — Radiographic examination EN 14784-1, Non-destructive testing — Industrial computed radiography with storage phosphor imaging plates — Part 1: Classification of systems EN 14784-2, Non-destructive testing — Industrial computed radiography with storage phosphor imaging plates — Part 2: General principles for testing of metallic materials using X-rays and gamma rays EN ISO 9934-1, Non-destructive testing — Magnetic particle testing — Part 1: General principles (ISO 9934-1:2001) EN ISO 15614-3, Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 3: Fusion welding of non-alloyed and low-alloyed cast irons (ISO 15614-3:2008) 3 ● Terms and definitions For the purposes of this document, the terms and definitions given in EN 1559-1 and of the applicable material standard apply. 4 Information to be supplied by the purchaser 4.1 ● Mandatory information The relevant wall thickness shall be given in the order. 4.2 Optional information Where applicable, the enquiry and order shall include other details, such as requirements for a) an as-cast condition; NOTE Heat treatment of malleable cast irons or ausferritic spheroidal graphite cast irons is a function of the material and is at the discretion of the manufacturer to achieve the desired...

Download Address

  • Download