BS EN 1143-1:2012 pdf download – Secure storage units — Requirements, classification and methods of test for resistance to burglary Part 1 : Safes, ATM safes, strongroom doors and strongrooms All products shall meet general requirements (4.2) and products with EX,GAS and CD designation shall meetadditional requirements (4.3,4.4 and 4.5). 4.2 General requirements 4.2.1Safes,strongroom doors and strongrooms There shall be no holes through the protection material other than those necessary for locks, cables or anchoring.nor for the fitting of accessories to strongroom doors and strongrooms. Cable openings in safes, strongroom doors and strongrooms (with or without a door) shall not exceed 100 mm .Unused cable entry openings shall be obstructed or plugged by the manufacturer by a means of which cannot beremoved from the outside without leaving visible traces. Free-standing safes with a mass of less than 1 000 kg shall have at least one hole by which they can be anchored.The anchoring assembly for each anchoring hole shall sustain the force given in Table 1. 4.2.2ATM safes ATM safes shall have means for plugging unused openings. These means shall be impossible to remove from theoutside without leaving visible traces. NOTE1 Openings through the protection material for ATM functioning are permitted in ATM safes. NOTE2 Cable entry openings in ATM safes may be larger than 100 mm . ATM safes, including optional ATM bases, shall have a fixing capability by which they can be anchored, and whichshall sustain the required force given in Table 2. 4.2.3 Boltwork cover plate Safes,ATM safes and strongroom doors shall have an internal boltwork cover plate that prevents unauthorizedviewing of the locks and bolitwork and access to them,when the door is open.Boltwork cover plates shall besecured so that they cannot be opened or removed by an unauthorized person without leaving visible traces. 4.2.4Cable hole Safes,strongroom doors and strongrooms of grade ll and higher shall either have a hole for a cable or apreparation enabling a connection to be made to an alarm system after the secure storage unit has been installed. 4.2.5 User instructions Safes,strongrooms and ATM safes shall be provided with operating and maintenance instructions,includinginstructions regarding the locks.Free-standing safes and ATM safes shall have instructions for anchoring.For built-in safes, strongroom doors and strongrooms, installation instructions shall be provided. 4.3 Additional requirements for EX designation When tested in accordance with Clause 9, safes of resistance grades ll to X designated ‘EX’ shall achieve theminimum post-detonation...

Download Address

  • Download