BS EN 4500-003:2012 pdf download – Aerospace series — Metallic materials — Rules for drafting and presentation of material standards Part 003: Specific rules for heat resisting alloys

BS EN 4500-003:2012 pdf download – Aerospace series — Metallic materials — Rules for drafting and presentation of material standards Part 003: Specific rules for heat resisting alloys 1 Scope This European Standard specifies the specific rules for the drafting and presentation of heat resisting alloy material standards for aerospace applications. It should be used in conjunction with EN 4500-001. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2032-1, Aerospace series — Metallic materials — Part 1: Conventional designation EN 4258, Aerospace series — Metallic materials — General organization of standardization — Links between types of EN standards and their use EN 4500-001, Aerospace series — Metallic materials — Rules for drafting and presentation of material standards — Part 001: General rules 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4500-001 apply. 4 Rules for drafting and presentation 4.1 Page 1: Title 4.1.1 General See EN 4500-001 and Example 1 of this standard. The following are examples of descriptions which shall be used. 4.1.2 Method of melting Complete in accordance with EN 4500-001 using one or more of the following terms: air melted; vacuum melted; vacuum refined; vacuum arc melted; vacuum arc remelted; electro-slag remelted; consumable electrode remelted; inert gas atomised; rotating electrode atomised; rotating crucible atomised; water atomised. 4.1.3 Form entries a) sheet, strip, plate; The term may be qualified with one of the following terms: rolled; cold rolled; hot rolled. b) bar; The term may be qualified with one or more of the following terms: hot rolled; cold rolled; drawn; extruded. 4.1.4 Form entries for powder metallurgy powder; compacted material; part. The term may be qualified with one or more of the following terms: hot isostatically pressed (hipped); extruded; forged. 4.1.5 Additional information entries for structural applications; for pressure applications; for rivets; for forged fasteners; for forged rings; for machined fasteners; for welding. 4.2 Page 2 See EN 4500-001. 4.3 Page 3 See EN 4500-001 and Example 2 of this standard. 4.4 Page 4 4.4.1 Page 4, line 1: Material designation See EN 4500-001 and Example 3 of this standard. 4.4.2 Page 4, line 2: Chemical composition The chemical composition shall...