BS EN 14688:2015 pdf download – Sanitary appliances — Wash basins — Functional requirements and test methods 1Scope This European Standard specifies the functional requirements and test methods for wash basins for domesticpurposes. NOTE1 For the purposes of this standard the term “domestic purposes”includes use in hotels, accommodation forstudents, hospitals and similar buildings, except when special medical provisions are required. NOTE2 All drawings are examples only. The shape of the appliance is left to the discretion of the manufacturer.2Normative references The following documents，in whole or in part,are normatively referenced in this document and areindispensable for its application.For dated references, only the edition cited applies. For undated references,the latest edition of the referenced document (including any amendments) applies. EN ISO 6506-1,Metallic materials – Brinell hardness test – Part 1:Test method (ISO 6506-1)Iso 9352,Plastics – Determination of resistance to wear by abrasive wheels 3Terms and definitions For the purposes of this document, the following terms and definitions apply.3.1 wash basin sanitary appliance primarily intended for washing the upper parts of the body, with one or more bowls, eachwith a waste outlet hole, with or without overflow and with or without taphole(s) Note 1 to entry: The various types of wash basins are differentiated by the methods of mounting. The main types aregiven in the definitions that follow. 3.1.1 wall-hung wash basin wash basin attached directly to a wall Note 1 to entry:See Figures 1 and 2. 3.1.2 bracket-mounted wash basin wash basin supported on brackets which are fixed to a wall Note 1 to entry: See Figure 3. 3.1.4 vanity wash basin wash basin installed into a vanity top Note 1 to entry: See Figure 5. Note 2 to entry: The bowl(s) may be mounted in different ways: a) the rim of the wash basin rests on the vanity top (inset wash basin); b) the front of the basin protrudes beyond the front edge of the vanity top (semi-recessed wash basin); c) the rim of the wash basin butts against the underside of the vanity top (wash basin mounted beneath a vanity top); d) the bottom of the wash basin rests on the vanity top (vessel wash basin). 4 Requirements 4.1 Load resistance When tested in accordance with 5.2, wall-hung wash basins shall not crack, be broken or show permanent distortion. 4.2 Draining of water When tested in accordance with 5.3, all water shall drain away. 4.3 Resistance to temperature changes When...
Download Address
Download