BS 687:2019 pdf download – Resilient floor coverings – Specification for plain and decorative linoleum on a corkment backing This document specifies the characteristics of plain and decorative linoleum on a corkment backing as acompound floor covering, supplied in roll form. To encourage the consumer to make an informed choice, this standard includes a classification systembased on intensity of use, which shows where resilient floor coverings should give satisfactory service(see EN ISO 10874). It also includes requirements for marking. The term ‘linoleum’ is frequently incorrectly applied to a range of floor coverings, often to those basedon polyvinyl chloride or rubber.Such materials are not included in this document. Normative references The following documents are referred to in the text in such a way that some or all of their contentconstitutes requirements of this document. For dated references,only the edition cited applies. Forundated references, the latest edition of the referenced document (including any amendments) applies.EN ISO 10874,Resilient, textile and laminate floor coverings — Classification (1So 10874) EN ISO 23997,Resilient floor coverings — Determination of mass per unit area (ISo 23997) EN ISO 24340,Resilient floor coverings —Determination of thickness of layers (ISO 24340) EN ISO 24341,Resilient and textile floor coverings — Determination of length, width and straightness ofsheet (sO 24341) EN ISO 24343-1，Resilient and laminate floor coverings — Determination of indentation and residualindentation — Part 1: Residual indentation (1so 24343-1) EN ISO 24344,Resilient floor coverings —Determination of flexibility and deflection (1SO 24344) EN ISO 24346,Resilient floor coverings — Determination of overall thickness (ISO 24346) EN ISO 26985, Resilient floor coverings — ldentification of linoleum and determination of cement contentand ash residue (lso 26985) EN ISO 105-B02,Textiles —Tests for colour fastness —Part BO2: Colour fastness to artificial light: Xenonarc fading lamp test (1sO 105-B02) ISO 4918, Resilient, textile and laminate floor coverings —Castor chair test3 Terms and definitions For the purposes of this document, the following terms and definitions apply. IS0 and IEC maintain terminological databases for use in standardization at the following addresses:—IEC Electropedia: available at http:.// www.electropedia.org/ —ISo online browsing platform: available at http:/ / www.iso.org/obp 3.1 linoleum with corkment backing product produced by calendering a homogeneous mixture of linoleum cement, cork and/or woodflour,pigments and inorganic filler onto a corkment backing Note 1 to entry: The product is then converted into its final form by an oxidative curing process; the only chemical cross-linking bondings in linoleum will be those which are formed...
Download Address
Download