BS EN ISO 10750:2018 pdf download – Footwear – Test method for slide fasteners – Attachment strength of end stops (ISO 10750:2015)

BS EN ISO 10750:2018 pdf download – Footwear – Test method for slide fasteners – Attachment strength of end stops (ISO 10750:2015) This International Standard describes a method intended to determine the attachment strength of the top and bottom stops of a slide fastener. The method is applicable to all types of slide fastener for footwear. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 7500-1, Metallic materials — Tensile testing — Part 2: Verification of the force measuring system of the tensile testing machines ISO 18454, Footwear — Standard atmospheres for conditioning and testing of footwear and components for footwear 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 19952 and the following apply. 3.1 slide fastener means of securing two flexible materials consisting of interlockable teeth, each attached to one of theopposing edges of two tapes, and movable slider that spans the interlocking teeth which when movedin one direction causes the teeth of one tape to interlock with the teeth of the other tape and when theslider is moved in the opposite direction causes the teeth to disengage Note 1 to entry: See Figure 1. 3.2 tape fabric panels to support other teeth of the slide fastener 3.3 slider means of drawing the two interlocking teeth together or apart as it traverses the length of the teeth 3.4 puller piece of plastic or metal attached to the slider as a means of manual grip for the user to operate 3.5 teeth individual component of the slide fastener or continuous plastic spiral which interlocks with an opposing element 3.6 end stop/top stop terminal components of the teeth to prevent the slider from disengaging from the teeth and tape 3.7 stringer textile tape with an attached row of teeth designed to interact with a row attached to another tape 4 Principle 4.1 General This International Standard describes the following methods. 4.2 Method 1 — Top stop attachment strength The slider of a closed fastener is clamped in one jaw of a tensile testing machine and the bottom end of the fastener is clamped in the other jaw. The jaws are then moved apart and the...