BS EN 61966-5:2009 pdf download – Multimedia systems and equipment — Colour measurement and management — Part 5: Equipment using plasma display panels

BS EN 61966-5:2009 pdf download – Multimedia systems and equipment — Colour measurement and management — Part 5: Equipment using plasma display panels 1 scope This part of lEC 61966 defines input test signals，measurement conditions，methods ofmeasurement and reporting of the measured data, to be used for colour characterization andcolour management of plasma display panels in multimedia systems. Colour control within equipment is outside the scope of this International Standard. It does notspecify limiting values for various parameters. 2Normative references The following referenced documents are indispensable for the application of this document.For dated references, only the edition cited applies.For undated references, the latest editionof the referenced document (including any amendments) applies. IEC 60050-845:1987,International Electrotechnical Vocabulary (IEV) – Chapter 845: Lighting/CIE17.4:1987,International Lighting Vocabulary (joint lEc/cIEpublication) IEC 61966-3:2000，Multimedia systems and equipment – Colour measurement andmanagement – Part 3: Equipment using cathode ray tubes ISO5-4:1995,Photography – Density measurements – Part 4: Geometric conditions forreflection density ISO 9241-8:1997,Ergonomic requirements for office work with visual display terminals (VDTs) -Part 8: Requirements for displayed colours IsO/CIE10526:1999,cIE standard illuminants for colorimetryISO/CIE10527:1991,CIE standard colorimetric observersCIE 15:2004,Colorimetry Terms and definitions For the purpose of this part of lEC 61966, the definitions of lEC 60050-845/CIE 17.4, as wellas the following definitions, apply. 3.1 background image on a screen of the PDP display other than the interested area of a colour patch 3.2 colour control effort to convert equipment dependent colour image data to equipment independent data for aspecific colour space including tone characteristics 3.3 colour patch, test area square colour image on a screen of the PDP display subject to be measured for colourreproduction, in which input data for the red, green and blue channels are kept constant withinthe image area 3.4 CRT colorimetrically well-controlled equipment using cathode ray tubes to present colour imageswith digital inputs for reference 3.5 PDP display any multimedia equipment using plasma display panels to present colour images 3.6 effective screen height vertical dimension of the effective screen area 3.7 effective screen area area where a picture can be produced 3.8 normalized (image) signal input signal normalized by its full scale value，whose level is of interest in calculation andevaluation of colour control function within PDP display,see also equation (1) 3.9 uncertainty (of measurement) parameter,associated with the result of a measurement, that characterizes the dispersion ofthe values that could reasonably be attributed to the particular quantity subject tomeasurement NOTESee also [16] 1. 4 Letters and symbols The notations...